Julabo LC 6 Programmable Controller Manual do Utilizador descarregar pdf (Página 20)

Manual operation

7. Manual operation

7.1. Start - Stop

Start:

 Press the start/stop key

The MULTI-DISPLAY (LED) indicates the actual bath

temperature. (example: 21.03 °C)

Stop:

 Press the start/stop key

The MULTI-DISPLAY (LED) indicates the message "OFF".



The unit also enters the safe operating state "OFF" or "r OFF after a mains power

interruptance. The temperature values entered via the keypad remain in memory.

With the programmable controller in keypad control mode, press the start/stop key

to restart operation.

With the programmable controller in remote control mode, the personal computer

must first resend the parameters set via the interface before the circulator may be

restarted.

7.2. Setting the temperatures

This setting may be carried out with the programmable

controller being in operating state Start or Stop!

Setting the working temperature "T1":

 Press the setpoint key .

The value previously set appears on the DIALOG-

DISPLAY (LCD) (example: 50.00°C).

A flashing segment indicates that a value needs to be

entered.

 Use the keypad to enter the new value (example: 37.00

°C).

 Press enter to store the selected value.

Setting the working temperature "T2":

 Press the setpoint key .

 Follow the instructions

 for "T1" (example: 25.50 °C).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 49 50

Sem comentários

Julabo LC 6 Programmable Controller Manual do Utilizador Página 20